Browse all practice questions for the NHI Bridge Inspection Course 130055 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

NHI Bridge Inspection Course 130055 Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which rating corresponds to widespread minor or isolated moderate defects?
  • Which material is described as being split and spalled?
  • Which components are part of NBIS substructure?
  • What is an example of appraisal data item?
  • What actions are typically required after NBIS inspections to ensure public safety?
  • What are the two main types of structural cracks in concrete?
  • What is delamination, and how does it affect a concrete deck's performance?
  • Which reinforcement is placed parallel with beams and stringers?
  • What is meant by redundancy in bridge design?
  • Which rating indicates the worst condition?
  • This type of deck includes orthotropic and grid decks.
  • Which orientation provides the greatest timber strength?
  • What are typical signs of deterioration inspectors look for on steel girders?
  • Environmental conditions can affect NBIS inspections by influencing access, visibility, and deterioration. Which statement is accurate?
  • Which type of deck uses flat, thin steel plates stiffened with closely spaced longitudinal steel ribs and a wearing surface?
  • What is the role of inspectors in preventing corrosion-related failures?
  • What is a condition rating, and what scale is commonly used in NBIS?
  • Which joint is characterized by two steel anchorages and a neoprene seal?
  • Which timber defect is parallel to the grain on the surface?
  • Which statement accurately describes routine inspections and special or emergency inspections?
  • What is the relationship between NBIS findings and safety postings?
  • How should an inspector evaluate a bridge with visible delamination in concrete?
  • What type of concrete deck uses removable or SIP forms to help maintain its shape while hardening?
  • Which rating corresponds to some minor defects?
  • What condition is most likely found in timber deck areas with drainage exposure?
  • Which deck panel type includes CIP topping to provide a wearing surface?
  • Which type of joint consists of a rectangle of neoprene with a honeycomb cross section?
  • Which prestressed concrete method tensions tendons after the concrete has cured?
  • How does an inspector determine the required maintenance actions from NBIS findings?
  • Which deck material is described as desirable for resistance to decaying agents?
  • What kinds of forces does steel resist?
  • Flexure cracks in the top of a concrete deck would most likely be found in what area?
  • What is meant by a pocket of water in a deck span and how is it addressed?
  • Which inspection method utilizes chain drags to determine whether concrete decks are sound or delaminated?
  • Timber deck areas exposed to drainage are to be inspected for which condition?
  • Which timber defect runs along the rings of the timber?
  • Which deck type uses timber planks with wide face of the plank in the vertical position?
  • What are typical signs of concrete substructure distress?
  • Which deck material is most common due to variable shapes and construction methods?
  • What should an inspector do when working near live traffic?
  • What are common methods to assess scour around foundations?
  • Which rating corresponds to major defects, strength affected?
  • What ethical responsibilities do inspectors have when reporting NBIS findings?
  • Which joint type can consist of two steel plates sliding on top of one another with a maximum movement of 4 inches?
  • Which condition is commonly indicated by deterioration of stay-in-place forms?
  • If a bridge is identified as scour-critical, which action is typically required?
  • What should be considered when inspecting expansion joints for leakage?
  • Why is documentation of exact location of observed defects important?
  • What is the primary method for determining steel remaining section or section loss?
  • Which statement best describes a hazardous condition requiring immediate action?
  • What is a fracture-critical member and why is it inspected annually?
  • Why is accurate labeling of NBIS findings important?
  • What is the timber defect that appears as cracks parallel to the grain on the surface?
  • Deck, culvert, bridge bearings, and channel are examples of which SNBI data items?
  • Which deck is found on many older bridges and movable bridges?
  • Which term describes the topmost surface that bears traffic on a deck?
  • Which bridge elements must be inspected under NBIS?
  • Which statement best describes a limitation of using drones for NBIS inspections?
  • What joint is made of three materials and can only accommodate movement of 1/4 inch?
  • Which data collection tool is commonly used to record field measurements and sketches during NBIS inspections?
  • a member that has been cast as one unit, without joints or seams.
  • How can drones assist NBIS inspections, and what limits might they have?
  • What is the NBIS convention for a condition rating scale?
  • What are the three primary inspection methods listed?
  • Which deck type becomes the top flange of the floor system due to its integration with the steel superstructure?
  • Expansion joints, wearing surfaces, and approach slabs are examples of:
  • NOT a data collection tool used during NBIS inspections?
  • What is the role of bearings in bridge performance, and what signs indicate bearing distress?
  • Which joint is made with two steel anchorages and a neoprene seal?
  • What does scour around piers/abutments refer to, and why is it important?
  • What is the primary goal of NBIS reporting?
  • Which type of deck is constructed with timber planks laid flat transversely across the superstructure?
  • Which joint type is designed to accommodate movement in multiple directions, including both parallel and perpendicular movement?
  • When NBIS findings are used to determine maintenance actions, how is redundancy considered?
  • Which defect occurs as surface bubbles in FRP due to moisture in the laminate?
  • Which reinforcement is used for temperature and shrinkage in a concrete deck?
  • A deck described as a flat, thin steel plate stiffened with closely spaced longitudinal ribs and wearing surface on top belongs to which deck family?
  • What part of the bridge permits longitudinal expansion and contraction?
  • Which method is not among the three primary inspection methods listed?
  • A bridge material that is split and spalled is what material?
  • In reinforced concrete decks, which reinforcement is primarily responsible for tensile strength?
  • Which timber defect runs through the timber rings?
  • How do NBIS findings relate to the decision to close a bridge?
  • What is the primary purpose of emergency actions taken to hazard conditions?
  • Which rating signifies the best overall condition?
  • Which type of reinforcement provides tensile and shear strength in a concrete deck?
  • In concrete filled-grid steel decks, corrosion can cause joints to:
  • If there is an imminent danger of collapse, what action should be taken?
  • ______ decks are found on many older bridges and movable bridges.
  • What type of concrete deck has panels that are cast offsite but do not include a wearing surface when installed?
  • Which deck component includes a wearing surface comprising bituminous, concrete, serrated steel, and timber?
  • Which inspection method is the primary method of bridge inspection for steel deck members?
  • Which of the following is a typical indicator of hidden damage in a corrosion-prone member?
  • Which rating corresponds to isolated inherent defects?
  • What is the significance of setting repair priorities after an NBIS inspection?
  • Which defect is described as a surface check at the grain?
  • Which factor is used to determine whether a damaged element requires immediate action?
  • What NDT methods are commonly used to assess hidden defects in concrete or steel?
  • Why is it important to distinguish between 'structurally deficient' and 'structurally unsound' (if used) in practice?
  • How does deterioration rate influence NBIS decision-making?
  • Which deck type uses sawn lumber transversely post-tensioned with high-strength steel bars?
  • Inspect concrete filled-grid steel decks at joints and bridge ends for which condition?
  • Which item is NOT an inspection area for bridge railings?
  • Which rating corresponds to some inherent defects?
  • Which timber defect runs along the rings of timber?
  • What sign alerts you to possible hazards and road conditions?
  • Which timber defect is described as cracks that run through the timber rings?
  • What concrete deficiency is caused by corroded rebar or severe overstress and cannot be visually identified?
  • What type of concrete deck has panels cast and cured offsite and reinforced with mild steel?
  • What is the consequence if scour is not addressed around foundations?
  • Which of the following items is listed as an example of Bridge Management Elements (BME)?
  • What is the role of pavement management systems in relation to NBIS?
  • If there are some moderate defects but strength is not affected, which rating applies?
  • What type of lighting is used to alert boat traffic to the location of piers on large rivers?
  • If moisture-related deterioration is observed, what should an inspector consider?
  • Which item is not part of the F-TOM factors?
  • Which joint type is typically sealed with a neoprene seal and uses two steel anchorages?
  • What bridge deck material is desirable for its resistance to decaying agents?
  • In NBIS, what does 'deficiencies observed' refer to?
  • Concrete decks are to be checked over supports for cracks, spalls, and which condition?
  • What does NBIS require regarding documentation?
  • How should an inspector handle lead-based paint risk during inspection?
  • _______ decks use glue or nail laminated connections to transmit loads to the superstructure.
  • What is the recommended approach to reporting an imminent hazardous condition?
  • Why are joints and bearings inspected together?
  • Which type of decks act integrally with the steel superstructure and become the top flange of the entire floor system?
  • What is the purpose of expansion joints, and what typical issues indicate deterioration?
  • Positive Moment Tension is located in which position on the deck?
  • Which rating corresponds to some moderate defects and strength performance not affected?
  • ________ decks are the most common type of deck due to variable shapes, sizes, and construction methods.
  • Which joint allows movement in both parallel and perpendicular directions?
  • Which failure mode is most likely in steel grid deck areas under heavy traffic?
  • What is an emergency inspection, and when is it typically triggered?
  • How does NBIS define 'structurally deficient' and 'functionally obsolete'?
  • Deteriorated and corroded stay-in-place forms often indicate what condition?
  • The acronym F-TOM denotes which combination of factors?
  • What does a pocket of water in a deck span indicate and how should it be addressed?
  • Which data item category includes issues like deck condition, culvert status, and channel alignment?
  • Which term describes a structural or safety-related deficiency that requires immediate follow-up inspection or action?
  • Which factor is least associated with triggering emergency actions during NBIS inspections?
  • Negative Moment Tension is located in which position on the deck?
  • What is scour and why is it critical to NBIS?
  • Which statement best describes the information included in a NBIS inspection report regarding observed deficiencies and urgency?
  • What is the value of using standardized NBIS forms and checklists?
  • Which rating corresponds to widespread moderate or isolated defects with strength affected?
  • When determining whether a bridge should be posted for load restrictions, what is the inspector's recommended approach?
  • Which deck is constructed of sawn lumber transversely post-tensioned with high-strength steel bars through the deck portion?
  • What is scouring around a pier, and how does it affect stability?
  • Which crack type is bending-induced in concrete?
  • Which reinforcement is placed transversely across the deck?
  • Which term describes a major deficiency requiring immediate follow-up inspection or action?
  • What should be included in a NBIS inspection report?
  • Which deck type is most suitable for reduced dead load and easier installation, commonly found on moveable bridges?
  • Which rating indicates some minor defects?
  • Which deck type is most often present on moveable and rehabilitated bridges for reduced dead load and easier installation?
  • What is the primary purpose of the National Bridge Inspection Standards (NBIS)?
  • The NBIS rating of substructure evaluates the condition of which components?
  • What is the purpose of the NBIS rating of substructure?
  • A joint described as consisting of backing material, joint filler, and poured sealant is called which?
  • How should inspectors document a potential hidden defect in a concrete deck?
  • What signs might indicate corrosion in steel bridge components behind protective coatings?
  • Proper NBIS record-keeping is important because it supports compliance, planning, and safety decisions. Which statement best describes its role?
  • Which term describes a deck member manufactured as a single unit with no joints?
  • Which rating corresponds to widespread moderate or isolated defects, strength affected?
  • Which component is primarily designed to accommodate expansion and contraction due to temperature changes?
  • How often are routine NBIS bridge inspections required?
  • Which statement correctly defines redundancy in bridge design?
  • A posted bridge is one with weight or axle restrictions due to deficiencies. What triggers the posting?
  • A deck consisting of a flat steel plate stiffened with closely spaced longitudinal ribs and wearing surface on top belongs to which deck family?
  • How do scour-critical bridges differ from ordinary bridges in NBIS?
  • Which road sign category helps drivers reach their destination safely?
  • Why is deck drainage inspection important under NBIS?
  • Which deck type includes orthotropic and grid decks as subtypes?
  • What bridge deck material can withstand relatively large loads over a short period of time?
  • Which prestressed concrete fabrication method involves tensioning tendons both before casting and after curing?
  • Visible concrete delamination should be handled by which action?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy